top of page

Load Cells

Model LC - Axis Load Cell for Stationary

Catalog
Drawings

Axis Load Cell for Stationary
• Application: Narrow, Medium and Wide Web;
• Axles stationary (fixed);
• Compact and very resistant;
• Versatile: different modes of mounting on the side of the machine;
• Range of use: 25 - 200 kgf;
• Excellent linearity and repeatability, thermally compensated;
• Accommodate variations caused by swelling or misalignment.

Model LCR - Load Cell for Rotary Axes

Catalog
Drawings

Load Cell for Rotary Axes
• Application: Narrow, Medium and Wide Wed;
• rotary axes;
• Compact and very resistant;
• Versatile: different modes of mounting on the side of the machine;
• Range of use: 25 - 200 kgf;
• Excellent linearity and repeatability, thermally compensated.

Model UPB - Load Cell Mounting Under Bearing - Stationary and Rotary Axis

Catalog
Drawings
  • Load Cell Mounting Under Bearing - Stationary and Rotary Axis
    • Application: Medium and Wide Web and High Tension Web;
    • Low profile height and ability to mount at any angle of inclination;
    • Supplied with fixing the bearing base to direct the cell;
    • Highly resistant to overloads;
    • Range of use: 12-16000 kgf;
    • Optional:
    • Cells resistant to water jets;
    • sealed cells resistant to corrosion and chemicals;
    • Cells resistant to high temperatures.

Custom and upon request

Model CR - Load Cell for Wires, Fibers & Ribbons - Mount Balance - Pulleys

Load Cell for Wires, Fibers & Ribbons - Mount Balance - Pulleys
• Application: Measurement of tension in yarns, fibers or tapes;
• Use with pulleys (through which wires, etc.).
• Material must be well-defined position;
• Range of use: 2.5 to 75 kgf.

Model CLT - Load Cell for Narrowband - Mount Swing

Load Cell for Narrowband - Mount Swing
• Application: Narrow web, where there is need for mounting the cell in balance;
• Option economical. Eliminates the need for cells with added roll;
• Allows use of any stationary shaft diameter, length and material;
• Eliminates the effect of varying the position of the force acting on the cylinder;
• Allows the use of pulleys;
• Range of use: 0.1 - 250 kgf;
• Length Range roll sensor: up to 500 mm.

bottom of page